Oil Residue Collection System

Kit Part Number BI-1011-1
Installation Time approx. 5 hours

In the original configuration, all oil from the garlock seals on the back of the engine are drained directly overboard by way of a gang drain at the bottom of the cowling. Thus, oil is covering the bottom of the nacelle, landing gear and brakes.

The Raisbek Oil Residue Collection System will install a tank at the present location of the gang drain by the oil cooler. The tank can then be drained in a timely manner to keep oil off the nacelle, landing gear and brakes.

BENEFITS
  • Eliminates oil on your nacelles, landing gear and brakes
  • Environmentally cleaner (no ground contamination)
  • Less cleaning
  • Easy maintenance
  • Cleaning and maintenance cost saving
  • Easy installation
  • FAA and EASA Certified
MANUAL

Oil Residue Collection System, Part No. BI-1011-1

ORCS_BI-1011-1
Air/Oil Separator System

Kit Part Number BI-6001-1
Installation Time approx. 7-10 hours

In the original configuration, vented air from the PT-6 Engine is directed out through piping in the wheel well and then dumped overboard aft of the nacelle, just forward of the flap.

The Raisbek Air/Oil Separator mounts on the firewall and is plumbed into the engine vent line. It extracts the fine mist of oil from that line and deposits it in the residue tank.

NOTE: Requires installation the Oil Residue Collection System.

BENEFITS
  • Eliminates oil on your nacelles, landing gear and brakes
  • Environmentally cleaner (no ground contamination)
  • Less cleaning
  • Easy maintenance
  • Cleaning and maintenance cost saving
  • Easy installation
  • FAA and EASA Certified
MANUAL

Air/Oil Separator System, Part No. BI-6001-1

Fuel Pan Assembly

Kit Part Number BI-2802-1
Installation Time approx. 2 hours

The Fuel Pan Assembly takes abuse every time you fuel your aircraft. Over time, that abuse causes wear and tear, and the Assembly no longer functions the way it was designed.

The Raisbek Fuel Pan Assembly is FAA PMA approved and is a direct replacement for the Beechcraft Fuel Pan Assembly (P/N 101-920061-37). It is manufactured with more durable materials.

BENEFITS
  • Direct Beechcraft FAA PMA replacement
  • More durable materials used in manufacturing
  • Cost savings
Fuel Pan

Kit Part Number BI-2801-101
Installation Time approx. 2 hours

The Fuel Pan Assembly takes abuse every time you fuel your aircraft. Over time, that abuse causes wear and tear, and the Assembly no longer functions the way it was designed.

The Raisbek Fuel Pan Assembly is FAA PMA approved and is a direct replacement for the Beechcraft Fuel Pan Assembly (P/N 101-920061-7). It is manufactured with more durable materials.

BENEFITS
  • Direct Beechcraft FAA PMA replacement
  • More durable materials used in manufacturing
  • Cost savings
Replacement Floor Panels,

P/N 18BI-53-121 replaces Beechcraft 101-420060-1
P/N 18BI-53-123 replaces Beechcraft 101-420061-1
P/N 18BI-53-145 replaces Beechcraft 50-440012-553 and -555
P/N 18BI-53-145 replaces Beechcraft 50-440012-655

Installation Time approx. 2 hours. Kits include hardware.

Raisbek manufacturers direct Beechcraft FAA PMA replacement floor panels for the entry and aisle ways for the King Air. They are made with durable, light weight composite construction.

BENEFITS
  • Direct Beechcraft FAA PMA replacement
  • Durable, lightweight composite construction
  • Cost savings
  • Easy installation
  • Readily available
MANUAL

Replacement Floor Panels, Part Nos. 18BI-53-121, 18BI-53-123